How to Remove Pressure Washer Nozzle? Easy ways (2022)
Pressure washers are the tools, extensively utilized in homes, backyards, and workplaces to smooth the water from the shower, kitchen, and different areas. It may be very crucial to preserve and smooth your pressure washers regularly. If they may be now no longer nicely wiped cleaned or maintained, they may ruin down very quickly than expected. Maintaining the procedure of pressure washers begins with the cleansing of nozzles found in them. The pressure washer nozzle is a crucial part of the machine that may be located in any home or office. The high-rated and reliable pressure washer nozzle is considered the best. Choose one that will work well and save you time.
Problems with Pressure Washer
|Oscillating Pressure (excessive than low)||Clogged nozzle|
|Low Pressure||Incorrect nozzle|
|Pressure washer is now no longer cleansing the surface nicely||Wrong nozzle present|
Replacing or Removing Pressure Washer Nozzles
Since it is very important to provide regular maintenance to the pressure washer, its cleansing process starts with the replacement or removal of nozzles. So in this article, we will understand the entire right that how to remove the nozzles from their attached position in the pressure washer.
- Switch the pressure washer off by simply turning the power dial to ‘0’ mark. Now find the exact location of the nozzles in the pressure washer. Now after turning the wand to one side, you will find a brass collar present on the band. Now try to pull down this collar without touching the colorful nozzle tip.
- Twist the nozzle in the anticlockwise direction where it will meet the trigger handle which will finally pop off the nozzle from the pressure washer.
- Now in some extreme cases, the nozzle gets stuck with the wand and becomes very difficult to remove. In such cases without harming the nozzle and pressure washer by providing it extra force, simply contact the manufacturer to solve the problem.
- If you want to solve this problem yourself, then simply unscrew the connection between the pressure hose and the nozzle because the pressure hose holds all the pressure which may stuck to the nozzle while removing it. The threads will start leaking and dripping. This will lead to the release of pressure slowly. Now nozzles can be removed easily at this point.
- Now place the new nozzle in the trigger and rotate it in the clockwise direction to lock it into its original correct position securely.
- Turn the pressure washer on and the new nozzle will be ready to use.
Why remove the Pressure Washer Nozzle?
We need to remove the pressure washer nozzle because
- It is essential because we need to maintain and take care of the pressure washers regularly.
- With the regular use of a pressure washer, it may sometimes get worn and torn out. In such a case to prevent the leakage of the water, we need to remove and insert the pressure washer nozzle.
- Water leakage can also lead to corrosion. So to prevent the corrosion of internal parts of the pressure washer, we need to immediately remove the pressure washer nozzle.
- Continuous use of the same pressure washer nozzle can lead to pressure drop and decreases the cleaning capacity. This means nozzle diameter decreases to 10% wear and a 21% drop in pressure. So this needs to be replaced as soon as possible to avoid further problems.
- If dirty water containing dust particles or debris passes through the nozzles of the pressure washer, clogging of nozzles may occur. This can be cleaned by simply removing or replacing the old nozzles with the new ones.
- Some pressure washers use hot water. The high temperature of the water can adversely affect the nozzle material. So nozzles need to be checked and repaired after a short time period.
- To remove the pressure washer nozzle, we consider three factors:
- Amount of water used
- Water quality
- Operating pressure
Selection of Right Nozzles for Pressure Washer
Selecting the right nozzles for your pressure washer allows you to get a perfect pressure washing job. Automatically select the nozzles according to the surface and type of washing you are engaged in.
- Select the number of nozzles accurately. If you select too many nozzles then it may lead to clogging and if you select fewer nozzles then it may lead to the use of too much water.
- Choose the appropriate nozzle pattern because this will have a direct influence on the output of the sprayer providing you water.
- Always select a nozzle having a brass collar in it rather than nozzles made up of plastic material. The reason behind this is brass collars show better response than plastic and will give more output.
- We can select the multiple nozzles for pressure washers, such as:
- High pressure (3/8″) spray nozzle guns
- Fine spraying nozzle guns that produce a soft flow of water
- High pressure (1/2″) spray nozzle guns
- Airless nozzles are more efficient than others and automatically adjust their spray pattern to suit the air pressure. Even if you’re not using the same size hose, you can still get a great spray!
- Perfect for spraying on wet surfaces and applying 1/2 gallon of paint. The Zone IQ lever is designed to provide maximum coverage and easy mixing as well as easy operation.
Pressure Washer Cleaning Tools
Sometimes, a cleaning tools kit is provided along with the pressure washer. This kit is used to unclog the clogged nozzles of the pressure washer. In case you are not provided with a kit when you buy a pressure washer, you can buy it separately from the market. The most common tool used is a cleaner wire. Apart from the cleaner wire, we can also use an unfolded paper clip which will help to unclog the nozzles of the pressure washer. This will require a less amount of money and very little effort. Hence it is very easy to work with these tools.
Pressure Washer Nozzle Tips
There are different colors and designs of pressure washer nozzles available in the market. They all are used for different purposes.
- Red 0°: It is used for tough stains and debris which is found on concrete material.
- Yellow 15°: It is used for removing dirt and paint from most surfaces like hardwood surfaces.
- Green 25°: It is used for cleaning dirt and mud on driveways and sidewalks.
- White 40°: It is used to clean the sides, and windows of your vehicles
- Black 65°: It is a special kind of nozzle having large orifices.